CONFO POWER OIL
Mould Release Agent for Concrete Formwork
Product Description
CONFO POWER OIL is a low viscosity mineral oil with high flash point for use in shuttering and moulds.
Specially formulated to ensure the quick and clean release of hardened concrete by reacting chemically
with the cement at the surface and reduces the blowholes increased formwork of wooden & metal shutter life.
This product facilitates release of moulds from metal casting, concrete & wooden form-work.
Specially formulated to ensure the quick and clean release of hardened concrete by reacting chemically
with the cement at the surface and reduces the blowholes increased formwork of wooden & metal shutter life.
This product facilitates release of moulds from metal casting, concrete & wooden form-work.
Application:
Shuttering Oil (Proprietary Grade) are applied by spraying guns,sponge, rollers or by brushes prior to
pouring aerated concrete and are recommended for use as a concrete mould release agent with the
protection of moulds from rust.
Preparation before using Shuttering Oil: Ensure all formwork is clean and dry before application.
Shuttering Oil is supplied ready to use - no need to dilute product. Apply before first pour and re-apply
before subsequent pours immediately after stripping and cleaning the mould. Application can be by spray or fine haired brush.
Shuttering Oil Coverage is 40-50m2 per litre dependent on porosity
pouring aerated concrete and are recommended for use as a concrete mould release agent with the
protection of moulds from rust.
Preparation before using Shuttering Oil: Ensure all formwork is clean and dry before application.
Shuttering Oil is supplied ready to use - no need to dilute product. Apply before first pour and re-apply
before subsequent pours immediately after stripping and cleaning the mould. Application can be by spray or fine haired brush.
Shuttering Oil Coverage is 40-50m2 per litre dependent on porosity
Advantages / Features
- Clean, fast and easy stripping of form work
- prevents sticking of formwork to concrete
- Protects steel formwork from corrosion.
- prevents water absorption from concrete for wooden frameworks
- Mould oils facilitate mould cleaning and enable reuse.
- Mould release oils decrease the cost and workforce that are needed for the mould application and save you money and time.
- Mould release oils help reduce the holes in concrete.
- Mould oils enhance the durability of concrete.
- Mould oils are Ready to use and easy to apply, no stirring or mixing is required
- Reducing leakage of water during the curing process