Our Products
- CONFO 200
- CONFOCRETE 333
- CONFO TILE PLUS
- CONFO TILE ADHESIVE P45
- CONFO TILE SEAL
- CONFO STONECRETE
- CONFO SET FAST
- CONFO POWER OIL
- CONFO PAVER ADMIX
- CONFO GROUT 222
- CONFO PLAST N-555
- CONFO PLAST P- 444
- CONFO FLOOR HARDNER-NM
- CONFO RUST CLEAN
- CONFO MICROCRET-ST30
- CONFO FLOOR HARDENER-M
- CONFO BLOCK JOINT MORTAR M15
- CONFO MICROCRETE-ST30
CONFO PLAST N-555
SNF BASED HIGH PERFORMANCE SUPER-PLASTICIZER FOR CONCRETE
Product Description
CONFO PLASTN-555 is a High Range Water Reducing admixture based on modified sulphonated naphthalene formaldehyde (SNF), available in liquid form. The qualities of super plasticizers with strong slump retention, high range water reduction, and concrete waterproofing.
CONFO PLASTN-555 produces high workability concrete requiring little or no vibration during placement. CONFO PLASTN-555 up to 25% reduction in free water without loss of workability, resulting in high-quality concrete of reduced permeability and increased early strength gain.
The product has been specially developed for applications in ready mix and site-batched concrete
CONFO PLASTN-555 produces high workability concrete requiring little or no vibration during placement. CONFO PLASTN-555 up to 25% reduction in free water without loss of workability, resulting in high-quality concrete of reduced permeability and increased early strength gain.
The product has been specially developed for applications in ready mix and site-batched concrete
Uses
CONFO PLASTN-555 to be used for free flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls, columns, pavements and other structural and non-structural elements.
Particularly advised for the following kinds of concrete
Particularly advised for the following kinds of concrete
- Improved water tightness
- Improved surface finish
- Improved cohesion properties
- Suitable for hot weather conditions
- Reduced shrinkage and creep
- Strong water reduction, resulting in high density, high strength and reduced permeability
- Improves the workability of concrete without increasing water
- Improves the workability, early and ultimate strength without increasing cement content and without reducing workability.
- Can be used with all types of concrete
Advantages / Features
- Easy to apply by brush
- Good bonding with most of the substrates
- Reduces cracking through increased mortar flexural strength
- Increases mortar, wears resistance under rubber wheeled traffic
- Increases mortar tensile strength
- Improves resistance to salt permeation
- slurry consistency Durable and effective waterproofing treatment for most areas
- Non-corrosive to steel & iron
- non-flammable and does not give off toxic gases, when exposed to fire
- Not harmful to the health of workman.
