WATER PROOFERS
CONFO STONECRETE
Quick Setting, Rapid Hardener & Plugger for PCC
Features
- Setting time of concrete can be accelerated by increasing the Dosage
- No long term deleterious effect on plain concrete
- High early strength plugging is completed within 5 minutes
- Helps faster mould de-shuttering
Usage
- Rapid concrete hardener for roads, pavements, industrial floors, fly ash bricks etc.
- Quick setting agent for construction of water storage tanks, roads, floor slabs, where frame work has to be removed quickly
Method of Application
Use required quantity either directly to the wet concrete mix in the concrete mixer under operation or along with gauging water.
Dosage
0.8% per 50kgs cement (CONFO STONECRETE cement), but may vary depending on site conditions.
Pack Size
Shelf Life
CONFO SET FAST
Chloride free Rapid/quick setting/hardening compounds for cement mortar & concrete
Features
- Excellent quality rapid hardner for cement motor and concrete
- Instant leak plugging and High early strength completed within 20-40 seconds Usage
Usage
- Quick setting agent for Emergency/ immediate repair work, Concrete Blocks/paver block, precast concrete, Manhole cover, Instant leak plugging and quick fixing of injection nozzle Tunnels, Stair/Shopping mall, Industrial floor, Repair Work, Water storage tanks, Road project/dam project etc.
Method of Application
Cut the location/hole to a V-groove shape. Keep 1 part of CONFO SET FAST and 2 parts of neat cement by volume ready (as little quantity at a time as required for 1 hole) and mix them thoroughly within 10 seconds and push the semi paste material inside the prepared groove very fast and keep pressure of trowel/ palm on it for about 5 minutes.
Dosage
30-40% by weight of cement; it cannot be diluted with water
Pack Size
Shelf Life
CONFO PAVER ADMIX
Quick Setting accelerator for all type of plain concrete and Motor
Features
- It works in all type of plain pre-cast concrete work.
- Setting time of concrete can be decrease by increased the dosage
- There is no side effect in concrete
- It can be used successfully for faster dismantling of shutters and for early gain of strength.
- Facilitates concreting in cold weather conditions, when temperature reaches below zero degree.
- It is also used in factory for emergency repair works within short time duration
- Heavy duty renderings and plugging pressure leaks.
- Highly useful for stop of water leakage through underground structures.
- Force plug into prepared area, work quickly. as it will set in under 3 minutes.
- Use with PPC/OPC or Rapid hardening cement.
Usage
- It can be used for in masonry or brick walls or cracks in buildings or industries, rocks, tunnels, underground basement, Water tank, Concrete Road Hardner, Paver Block Hardner, Swimming Pool, Dam through which there is water seepage.
- It is also used in factory for emergency repair works during short time duration and some cases it can be use as a waterproofing compound, likes As a water proofer, it is used in basements, flats, plastering walls, reservoirs, etc.
- It can be used as floor hardener also. Method of Application Use required quantity either directly to the wet concrete mix in the concrete mixer under operation or along with gauging water.
Dosage
0.6% per 50kgs cement (CONFO PAVER ADMIX: cement), but may vary depending on site condition
Pack Size
Shelf Life
CONFO 200
Normal setting liquid integral waterproofing compound for all types of concrete and
mortar.
Features
- Compatible with all varieties of Portland Cement including Slag Cement?
- Permeability of concrete is greatly reduced, acts as a hydrophobe Higher strength and impermeability of concrete is greatly improved.
- Highest possible water tightness achieved through lower w/c, thereby ensuring durability of concrete structure. With increased cohesion, segregation and bleeding are substantially reduced.
- Contains active corrosion inhibitors which protect steel against corrosion.
- Improved surface finish of concrete.
- Improved pumpability and workability. o Reduced shrinkage crack development in plaster and concrete.
- Chloride free safe in pre-stressed and re- inforced concrete
Usage
- Sunken slab, podium slab.
- Water retaining structures.
- Swimming pools.
- Roof slabs and cement screeds/mortar Basements
- External plastering
Method of Application
Place cement and aggregates into the concrete mixer as per the mix design. Mix for one minute and add about 80% pre-measured water and further mix for 2-3 minutes and Add measured quantity of CONFO 200 and as per the recommended dosage into the remaining 20% water. Add this mixture into the concrete mixer and mix for another 2 minutes. Place the obtained concrete as needed.
Dosage
200ml per bag of cement